Microtek Hi-End Sine Wave Jumbo UPS 8 KVA is designed to run Load up to 6400 Watts. It is the best suited UPS for High Capacity Sophisticated Appliances.
It has many In-built Protections such as Overload, Battery Deep Discharge and Short- Circuit etc.
Rated Capacity
|
8 KVA / 144 V
|
Output Power
|
6.4 Kilo Watts
|
Battery
|
12 Battery System (144 VDC)
|
Waveform
|
Pure Sinewave
|
Warranty
|
2 Years
|
Key Features
-
Advanced Battery Management (ABM) for Longer Battery Life and Quick Charging
-
DSP based PWM Technology using Hi-Grade IGBT’s
-
LCD Panel Display for Status and Faults
-
Static By Pass Switch for fast Switch Over (Optional)
-
Generator Compatible
-
In-built TDR for Compressor Based Application, e.g. Air Conditioners
Display
-
MAINS ON
-
UPS ON
-
BATTERY CHARGING
-
OVERLOAD
-
BATTERY LOW
-
FAULT INDICATION
Technical Specifications
Input
|
|
Input Voltage (Standard range)
|
100 V ~ 295 V
|
Input Voltage (Narrow range)
|
180V ~ 265 V
|
Output
|
|
Output Voltage (Mains Mode)
|
Same as Input
|
Output Voltage (UPS Mode)
|
220V ± 10%
|
Output Waveform (Mains Mode)
|
Same as Input
|
Output Waveform (UPS Mode)
|
Pure Sinewave
|
Changeover
|
|
Switchover from Mains to UPS and UPS to Mains
|
Automatic
|
UPS Transfer Time
|
≤ 15 msec.
|
Technology
|
|
Surge Rating
|
24000 VA
|
UPS Overload / UPS Short-Circuit
|
110% / 250%
|
Overload Handling Capacity
|
105 % - 1 minute, + 125% for 5 second with 4 times Auto Reset.
|
THD
|
< 3%
|
Efficiency (Battery Mode)
|
> 88%
|
Auto Reset Feature
|
Yes
|
Input DC Range
|
120 ~ 173 V ± 1 Volt
|
Charging Current
|
10 Amps ± 5 Amps
|
Auto Reset Feature
|
Yes
|
Separate Output with TDR
|
3 ~5 minutes TDR
|
Operating Temperature
|
0 to 45° C
|
* Load may vary depending on the condition of the Appliances or Manufacturers Specs.
*Specifications are subject to change without notice. The Company does not take liability for consequential damages.